A grease trap holds floating grease and settled food solids so they do not flow straight into the drain line. As buildup takes up space, wastewater has less room to pass through. You may notice slow sinks, odors near the trap, or water backing up during cleanup. Pumping removes the contents, while cleaning can address residue on the walls and baffles. If you are unsure what the trap needs, call to describe what you are seeing to a provider.
Call (877) 704-1271 to reach a provider →
What a pump-out removes
A pump-out removes the floating grease, wastewater, and settled food solids inside a trap or interceptor. Removing those layers restores room for wastewater to flow through the unit and helps keep grease away from the outlet.
Ask what cleaning is included along with pumping. General practice often includes scraping buildup from accessible walls and baffles, then checking that the outlet tee and baffles are in place. Damaged parts may need separate attention.
- Floating grease at the surface
- Settled solids at the bottom
- Wastewater between those layers
The 25 percent rule and how frequency is set
Many local authorities use what is often called the 25 percent rule. Under that guideline, pumping happens before the combined depth of floating grease and settled solids reaches 25 percent of the trap’s total liquid depth.
That measurement is a guide to buildup, not a fixed schedule. A fryer-heavy kitchen can reach 25 percent in a couple of weeks, while a light-prep kitchen may take far longer. Changes in menu or volume can also change how quickly grease collects.
Your city or sewer district sets the schedule that applies to your kitchen. Keep service records and note the measured buildup after each pump-out. Those details can help you discuss a practical schedule while meeting local requirements.
What the provider should leave you
Keep paperwork that shows what was removed and when the work took place. Ask the provider what documentation they supply, including a waste manifest and an entry for your grease trap service log. Record any reported damage to a baffle or outlet tee.
- A dated service log entry
- A waste manifest showing removal
- The trap or interceptor serviced
- Notes on buildup or damaged parts
Store these with your kitchen’s service records so you can check the last pump-out date and have the paperwork ready for an inspection.
Signs you are overdue
- Sinks draining more slowly than usual
- Standing water in a sink during cleanup
- Odors around the trap or nearby drains
- Grease visible near the outlet
- A pump-out log with no recent entry
These signs can mean the trap needs pumping, though a blocked line can cause similar drain trouble. Check your pump-out log and describe the symptoms when you call. A measured grease layer gives a clearer picture than odor alone.
What happens to the waste after pumping
Pumped grease trap waste leaves the kitchen for handling away from the drain system. The mix contains water, floating grease, and settled food solids. Disposal practices depend on the waste and local requirements, so ask where the material will go.
A waste manifest helps document that removal. Keep it with the service log entry and check that the equipment and service date match your records. If your kitchen has a shared interceptor, make sure the paperwork identifies the unit that was pumped.
What affects the price of a pump-out
Price can depend on whether the work involves an indoor trap or an in-ground interceptor, how much waste must be removed, and how easy it is to reach the access covers. Heavy buildup may add cleaning work around the walls and baffles. Ask what the quoted work includes, especially cleaning, waste handling, and documentation. Tell the provider about access issues or a suspected damaged outlet tee before scheduling.
Grease trap pumping questions
How do I know when my trap was last pumped?
Check your grease trap service log, waste manifests, and invoices for the service date and the unit identified. If the records are missing, ask the previous service provider or whoever maintains the kitchen’s maintenance files. Start a log with the next pump-out.
Does pumping include cleaning the walls and baffles?
Pumping removes the trap’s contents, but the cleaning included can vary. Ask whether the work covers residue on accessible walls and baffles, and whether the outlet tee will be checked. Have any damage noted in the log entry.
Can I set up a recurring pumping schedule?
Yes, you can ask a provider about recurring service. Your city or sewer district sets the applicable requirements, and measured buildup helps show whether the timing suits your kitchen. Keep each log entry and manifest so you can track how the trap changes.
Do I need to be on site during the pump-out?
Ask the provider what access they need before scheduling. Someone may need to open a gate, clear equipment from the trap cover, or identify the correct interceptor. Arrange where the manifest and service log entry should be left.