An in-ground interceptor holds grease and food solids before kitchen wastewater reaches the sewer. Over time, buildup can coat the outlet tee, crowd the baffles and make it harder to see the tank’s condition. Slow drains or standing water in the sink can mean the interceptor needs attention, though a blocked line can cause similar trouble. Cleaning addresses waste in the tank and buildup on accessible parts. If you are seeing these signs or preparing for an inspection, call to describe the problem to a provider serving your area.
Call (877) 704-1271 to reach a provider →
How interceptors differ from indoor traps
An indoor grease trap usually sits near the fixtures it serves. An interceptor is usually installed below grade outside the building and handles wastewater from a larger part of the kitchen. Its capacity is commonly about 500 to several thousand gallons.
Both separate grease and solids from wastewater, but access and cleaning needs differ. An outdoor tank may have access lids, internal tees and baffles, and a nearby sample box. If your maintenance paperwork mentions an interceptor, ask whether the work covers those parts as well as removal of the tank contents.
What thorough cleaning includes
- Removal of accumulated grease, wastewater and settled solids from the interceptor.
- Cleaning of reachable tank walls where grease has collected.
- Attention to the inlet and outlet tees so their openings are visible.
- Cleaning around baffles without treating damaged parts as ordinary buildup.
- Jetting of accessible lines when the scope of work calls for it.
- A look at the sample box, if the setup has one and access is available.
The scope can depend on the tank and its condition. Ask which parts are included, whether jetting is needed, and what the written paperwork will describe.
Confined space considerations
An interceptor is a confined space. Its atmosphere and limited openings can make entry hazardous, so cleaning is generally planned from above through the access lids. Tank contents can be removed and reachable surfaces cleaned without anyone climbing inside.
Keep the lids and surrounding work area accessible. If equipment, storage or traffic blocks an opening, mention it when discussing the job. Access affects what can be reached from above and whether the internal parts can be seen after waste is removed.
Inspecting tees, baffles and lids
The inlet tee guides incoming wastewater into the tank. The outlet tee helps keep floating grease from leaving with the flow. Once buildup is removed, their openings and visible connections can be checked for damage or missing pieces.
Baffles help separate the flow inside the interceptor. Heavy grease can hide a cracked or loose baffle, so its condition is easier to judge after cleaning. A damaged part may need separate repair work.
Lids should sit securely over their openings. During service, ask that visible lid damage or a poor fit be noted in writing. That gives you a clear description to use when arranging any needed repair.
How buildup affects inspections
Grease covering the outlet tee or baffles makes it hard to tell whether those parts are intact. A full tank can also obscure the condition of the walls and settled solids at the bottom. Cleaning leaves the accessible areas easier to see.
Your city or sewer district sets its own service and recordkeeping requirements. Before an inspection, check your maintenance paperwork and ask what documentation will be left after cleaning. Keep the written details with your kitchen’s records, especially if they note damaged parts or limited access.
What affects the price of interceptor cleaning
Price can depend on interceptor capacity, how much waste has built up and how easily the access lids can be reached. Cleaning grease from tees, baffles or walls may change the scope compared with removing tank contents alone. Jetting, a sample box that needs attention and difficult access can also affect the work. Describe the tank location, recent maintenance history and any drain symptoms when you call, then ask the provider what is included in the quoted scope.
Grease interceptor cleaning questions
Is interceptor cleaning different from interceptor pumping?
Pumping removes accumulated contents from the tank. Cleaning may also address grease on reachable walls, tees and baffles, with jetting included when the scope calls for it. Ask what work is covered so the written paperwork matches what your kitchen needs.
How do I find my interceptor?
Look for access lids outside the kitchen, often along the wastewater line leaving the building. A site plan or past service record may show the location. Avoid lifting an unfamiliar lid yourself; use the records to describe the likely location.
What if parts inside are broken?
Cleaning can make a damaged tee or baffle easier to see, but it does not repair the part. Ask for the damage to be described in the service record and discuss whether separate repair work is needed before normal use continues.
Can cleaning happen while the kitchen is open?
That depends on access, the planned work and whether kitchen fixtures need to stop draining during service. Tell the provider about meal periods, deliveries and any lids near traffic. Discuss how the work would affect kitchen use before scheduling.