An in-ground interceptor holds grease and settled solids so they stay out of the sewer line. As that material builds up, wastewater has less room to pass, and grease can reach the outlet tee. Slow drains or standing water in the sink can mean the interceptor needs attention, though a blocked line can cause similar symptoms. Pumping generally removes the tank contents so the baffles and outlet tee can be checked for visible damage. Call to describe what is happening to a provider.
Call (877) 704-1271 to reach a provider →
Interceptor sizes and why vacuum trucks are needed
In-ground interceptors commonly hold around 500 to 2,000 gallons for a single restaurant. Larger kitchens and shared systems may have bigger tanks. Unlike a small indoor grease trap, an interceptor holds substantial amounts of wastewater, floating grease, and solids that settle at the bottom.
A vacuum truck is commonly used to remove that material through the tank's access openings. Ask whether the service includes removing the full contents and checking accessible baffles and the outlet tee afterward. Those parts help keep grease from passing downstream.
Typical pumping intervals
Your city or sewer district sets the pumping schedule, often using both a required interval and the amount of grease and solids in the tank. Many local authorities require pumping at least every 90 days, or sooner when buildup reaches a set share of tank depth, often 25 percent.
Kitchen volume matters too. A busy line or food plant can send more grease into an interceptor than a kitchen with lighter use. Keep service records and ask the provider how tank measurements affect the next pumping date under your local rules.
Access and scheduling for busy kitchens
- Locate each interceptor lid before the service visit and make sure it can be opened.
- Check whether parked cars, deliveries, or stored supplies block access to the lids.
- Identify a place where a vacuum truck can park within reach of the tank.
- Flag kitchen hours when vehicle access or work near the lids would disrupt service.
- Note locked gates, shared driveways, or access controlled by a landlord.
These details help you discuss scheduling around deliveries and meal service. If the interceptor is shared, coordinate access with whoever controls the parking or service area.
Keeping documentation for inspectors
Keep each pumping record where you can find it during an inspection. The record should identify the interceptor, the service date, and what was removed. Ask the provider what measurements and disposal details appear on its paperwork.
Keep earlier records together so you can show the service history, especially if several kitchens use the same interceptor. Note any reported problem with a baffle, outlet tee, or access lid, along with any follow-up work. Your local authority determines which records you must retain.
The cost of falling behind
As grease and solids build up, they take space away from wastewater. Grease can then move toward the outlet tee and into the line. Slow drains, odors near the tank, or wastewater around a lid can mean the interceptor needs attention.
A backup can interrupt prep, dishwashing, or meal service while the cause is sorted out. Delayed pumping can also leave gaps in the service records you may need for an inspection. If symptoms appear, describe them clearly when you call so the provider understands the situation.
What affects the price of interceptor pumping
Tank size, the amount of material inside, and access for a vacuum truck can affect the price. Buried or hard-to-open lids may require more work than clear, accessible openings. Travel, disposal requirements, and the work needed to clear a heavily loaded tank can matter too. Tell the provider where the interceptor sits, whether the lids are accessible, and when it was last pumped. That gives you a more useful pricing discussion than tank size alone.
Grease interceptor pumping questions
How do I find out my interceptor’s size?
Check building plans, the interceptor label, or past pumping paperwork for its stated capacity. If those are missing, describe the tank and its access openings during the call. Ask the provider what information it needs to identify the size before discussing service.
Does every interceptor need a vacuum truck?
The equipment depends on the tank and the material that must be removed. In-ground interceptors commonly need vacuum equipment to remove wastewater, grease, and settled solids through their access openings. Describe your setup to the provider rather than assuming the method used for an indoor grease trap will apply.
What if the interceptor is shared with other businesses?
Find out who controls access, arranges pumping, and keeps the pumping paperwork. A landlord or property manager may handle those details. Share the interceptor location and any drain problems during the call, and clarify who can approve the work and receive the paperwork.
Can pumping be scheduled outside business hours?
Ask the provider about scheduling by phone. Explain your kitchen hours, delivery periods, and any limits on truck access or opening the lids. If a gate or shared parking area is involved, confirm who can provide access at the agreed time.